Baja Kits Plus 2 suspension is just that a bolt on 4" total wider track width making for more wheel travel, increase on and offroad stability, ground clearance, larger tires and shocks. This kit is made to fit perfectly on your Toyota by replacing the stock rubber bushings and ball joints with Trophy Truck quality zero deflection Delrin Bushings and Uniballs, the strength and handling qualities are substantially increased. We also increase the caster angle to get rid of the loose front end feeling that often occurs with mid to long travel suspension kits. This kit is designed to be paired with 2.5 coil overs and optional? 2.5 bypasses which can be installed upon initial install or later down the road (Bypass mounts will require welding)
Baja Kits Plus 2 suspension is just that a bolt on 4" total wider track width making for more wheel travel, increase on and offroad stability, ground clearance, larger tires and shocks. This kit is made to fit perfectly on your Toyota by replacing the stock rubber bushings and ball joints with Hi Density Bushings and Uniballs, the strength and handling qualities are substantially increased. We also increase the caster angle to get rid of the loose front end feeling that often occurs with mid to long travel suspension kits. This kit is designed to be paired with 2.5 coil overs and optional? 2.5 bypasses which can be installed upon initial install or later down the road (Bypass mounts will require welding)
The Baja Kits Advantage:
- CAD designed boxed UCA
- Trophy Truck grade Delrin bushings with grease fittings for industry leading durabilty and a quiet, no squeak ride
- 1" Hi angle Trophy Truck grade uniball's replace the weak stock ball joints that fail under hi angles and loads seen from normal offroad use
- Our CNC machined corrosion resistant misaligns have a tapered snout to adapt your stock upright/spindle with ease
- We've increased the caster angle that you lose when lifting a truck with stock arms to regain on road stability, handling and alignment
Technical Specs:
Track Width - 2" Wider each side
Wheel Travel - 11"+
Lift - 3"-4"
Product Requirements:
Shocks - Aftermarket Replacements Shocks, Custom King Shock, Bypass Shocks
Tire Size - 33" are recommended for most, 35" Are possible but an aggresive option
Wheels Size - 16" or 17" with Max Backspace of 4.75"
Fenders - Fiberglass Fenders or Trimming of stock fenders is needed (35" will require fiberglass & significant body mount mod and trimming)
Parts Included:
**Kits come pre assembled and ready for install, as seen in product photos**
Boxed Upper Arms
Baja Kits Badges & Rivets
Hi Density Bushings
Crush Sleeves
Zerk fittings
1" uniballs
Countersunk Top Misaligns & 12 point bolts
Tapered Misalign Adapters
Boxed Lower Arms
Baja Kits Badges & Rivets
Delrin Bushings
Crush Sleeves
Zerk fittings
1" Uniballs
Countersunk Top Misaligns & 12 point bolts
Tapered Misalign Adapters
Shock Bolts and Nuts
Additional Items
Brakelines, Fittings,Adapters and Copper Washers
Zinc plated CNC Steering Extensions
Extended Heat Treated Axles (4WD trucks only)
Install Guide
Baja Kits Sticker pack
Install Information:
Level 2 Install, Bolt on (Minimal Welding Required if Adding Limit Straps)
Install Time: 8 hours (Times will vary depending on knowledge and skill level)
Total Reviews (0)
Write the First Review!